Skip to product information
PSP PreQursor 3
1/2
PSP PreQursor 3

PSP PreQursor 3

PSP AUDIOWARE
In stock
€61,00 EUR

inc. VAT

Quantity
Product Information

PSP preQursor3 offers PSP’s uniquely designed filters with low resonance peaks for reduced ringing artifacts great band separation and narrow notching when attenuating. All four filters are bell-type filters when boosting and have progressive Q factors.

PSP preQursor3 introduces PSP's Advanced Analog Modelling of preamplifier and filters to make the operation of the plug-in even more precise then previous PSP equalizer emulations. The analog modeling algorithm can be enabled and controlled per instance or globally per group of instances. The latter allows for easy control of the amount of analog-like processing on either selected tracks or all tracks in the mix.

All these characteristics result in a processor that not only sounds excellent on acoustic tracks overall mixes or any other application but also allows you to virtually create the input console for all tracks in your mix with easy and convenient controls. In every usage case PSP preQursor3 will maintain the natural feel and definition of the material.

The All-New PSP preQursor3

  • Built-in 31-band analyzer
  • Multi-step Q factor
  • Redesigned analog emulation
  • Wider frequency ranges
Key Features
  • High Pass Filter.
  • Equalization can be applied to Left, Right, Mid, Side or to both input channels.
  • 64-bit double precision floating point math for ultra-low cumulative errors in the filters – no more worrying about piling up noise or unrealistic filters' behavior!
  • An optional preamp and in-filters nonlinearities emulation.
  • Four bands of parametric equalization: peaking Low and High on boost - shelving Low and High on cut and peaking Low Mid and High Mid filter bands with adjustable, frequency, Q, and gain-following Q values.
  • FAT double sampling: In PSP preQursor3 FAT is automatically switched on for low (below 50 kHz) sample rates, and off for higher sample rates. This ensures accurate processing independent of the sample rate.
  • An optional second-generation SAT (for SATuration) option in the output of each plug-in. This not only protects against digital clipping in software or hardware that comes after the plug-in, but it also adds a smooth overdriven sound to hard-driven signals. The SAT algorithm is located after the output level control in the plug-in’s internal chain, and its ceiling reference level is set to a fraction of dB below 0 dBFS.
  • All actual parameter values like gain, frequency, or Q may differ from displayed values. This is a typical feature of analog equalizers.
  • A 31-band bar analyzer with optional spectrum curve display mode.
System Requirements
Mac
  • macOS 10.14 – macOS 16
Windows
  • Windows 7 – Windows 11
Download/Activate

Your purchase from mypluginworld.com provides a digital license for your PSP Audioware plug-in.

iLok Required: You must have a free iLok account and the iLok License Manager installed. Each licence allows for three simultaneous activations — you can authorise your computer directly ("soft" activation) or use a physical iLok USB dongle (2nd Generation or later).

1. Create a PSP Audioware Account and Register Your Product
  • Visit the PSP User Area: pspaudioware.net/UserArea/identify
  • If you do not have an account, click Create an account and fill in the required fields (username, password, name, email, address)
  • Once logged in, choose the manual product activation option
  • Enter the activation code from your mypluginworld.com order confirmation email
  • Important: Activation is irreversible — you cannot reuse the same activation code
2. Set Up iLok
  • Visit ilok.com and create a free iLok account if you do not have one
  • Download and install the iLok License Manager from ilok.com/#!license-manager
  • A hardware USB iLok dongle is not required but is supported (2nd Generation or above)
3. Download the Plug-in
  • Log in to your PSP account at the PSP User Area
  • Download the appropriate installer for your operating system (macOS or Windows)
  • Install each product individually
4. Activate Your Licence via iLok
  • Open iLok License Manager and click Redeem an Activation Code
  • Paste the PACE activation code provided by PSP after registration
  • Deposit the licence to your iLok account, computer, or USB dongle
  • You can activate on up to three separate locations (computers or dongles)
  • Licences can be moved between devices at any time using iLok License Manager
5. Use in Your DAW
  • Open your DAW — the plug-in will appear in your plug-in list under the appropriate format (VST, VST3, AU, or AAX)

Note on Non-iLok Plug-ins: Some PSP products use a licence file system instead of iLok. For these, download your unique licence file from the User Area using the batch authoriser or individual download links, unzip if necessary, and double-click to authorise. Restart your system after authorisation.

Lost your licence? Log in to the PSP User Area at pspaudioware.net/UserArea/identify to re-download installers and manage your licences. For support, contact PSP at support@pspaudioware.com.

Related Products